330 821 6342

Scroll to Bottom for LINKS to other Types of John Guest Fittings and
ALSO other Brass Fitting Categories

_____________________________________________________________

MALE CONNECTOR JOHN GUEST FITTINGS

• Advantages:
No special tools are needed to assemble. Just bottom the tubing in the fitting body for a positive seal
Release button offers quick and easy disconnections
• Specifications:
Manufactured in gray acetyl copolymer with food grade nitride o-ring
Fittings are in the PI range of inch-size fittings
• Applications:
Especially suitable for applications involving foodstuff and potable liquids
Suitable for air and inert gasses and can therefore be used on CO2 lines, pneumatic applications and vacuum.
• Temperature Ranges:
Max 150 psi at 70ºF
Max   60 psi at 140ºF

ASSEMBLY INSTRUCTIONS:

1. Cut tubing squarely with J&B tube cutter 50500 Be certain the port or mating part is clean and free of debris.
2. Insert tubing into fitting until it bottoms. Pull on tubing to verify it is properly retained in the fitting.
3. To disassemble, simply hold release button against the body and remove tubing.
4. To reassemble, lubricate leading end of the tubing with light oil or petroleum jelly

Links to:   John Guest Fittings FITTINGS

ASSORTMENT     John Guest fittings
    2250        

LINK	ITEM	LINK	ITEM	LINK	ITEM	LINK	ITEM
PI010821S Male Connector .		PI0408S Union .		PI0308S Union Elbow .		PI050821S Stem Adapter .
PI090822S 90° Swivel Elbow .		PI0208S Tee . .		. . .		. . .