GREASE FITTINGS and ACCESSORIES
Scroll to end of list for Accessories
ASSORTMENTS for: Grease Fittings
2102 , 3033 and 3034
- 1/4-28 , 1/8 Pipe , 1/4 Pipe , Metric , Drive Type , Button Head
- Ball check in head.
- Pressure rating: 10,000 PSI.Deep
_____________________________________________________________
1/4-28 SAE THREAD
| PART NO |
DESCRIPTION |
LENGTH |
QTY |
| 20655 |
45° LONG |
29/32 |
25 |
| 20656 |
90° SHORT |
3/4 |
25 |
| 20653 |
SHORT |
35/64 |
25 |
| 20647 |
LONG |
11/16 |
25 |
| 20654 |
EXTRA LONG |
31/32 |
25 |
_____________________________________________________________
1/8-27 TAPER PIPE THREAD
| PART NO |
DESCRIPTION |
LENGTH |
QTY |
| 20648 |
STRAIGHT |
11/16 |
25 |
| 20649 |
STRAIGHT |
1-1/4 |
25 |
| 20650 |
45° |
29/32 |
25 |
| 20652 |
90° |
27/32 |
25 |
_____________________________________________________________
1/4-18 TAPER PIPE THREAD
| PART NO |
DESCRIPTION |
LENGTH |
QTY |
| 38301 |
STRAIGHT |
59/64 |
25 |
| 38302 |
67-1/2° |
1-1/16 |
25 |
_____________________________________________________________
METRIC
| PART NO |
DESCRIPTION |
THREAD |
QTY |
| 25048 |
STRAIGHT |
6 MM x 1.00 |
25 |
| 25049 |
45° |
6 MM x 1.00 |
25 |
| 25050 |
90° |
6 MM x 1.00 |
25 |
| 25051 |
STRAIGHT |
8 MM x 1.00 |
25 |
| 25052 |
45° |
8 MM x 1.00 |
25 |
| 25092 |
90° |
MM x 1.00 |
25 |
| 40403 |
STRAIGHT |
8 MM x 1.25 |
25 |
| 25053 |
STRAIGHT |
10 MM x 1.00 |
25 |
| 40365 |
45° |
10 MM x 1.00 |
25 |
| 25054 |
90° |
10 MM x 1.00 |
25 |
_____________________________________________________________
DRIVE TYPE
| PART NO |
DESCRIPTION |
SIZE |
QTY |
| 20661 |
STRAIGHT |
3/16 |
25 |
| 20657 |
STRAIGHT |
1/4 |
25 |
| 20658 |
67-1/2° |
1/4 |
25 |
| 20659 |
STRAIGHT |
5/16 |
25 |
_____________________________________________________________
BUTTON HEAD
| PART NO |
DESCRIPTION |
SIZE |
QTY |
| 40366 |
STRAIGHT |
1/8 NPT |
25 |
| 40367 |
STRAIGHT |
1/4 NPT |
25 |
_____________________________________________________________
GREASE FITTING CAP
- Made of low polyethylene.
- Snap over grease fittings to seal out grease & moisture.
- Fit standard grease fitting heads, with the exception of flush type, button heads and pin type.
| PART NO |
COLOR |
QTY |
| 59111 |
RED |
50 |
_____________________________________________________________
LOCKNLUBE 90° COUPLER ADAPTER
- 90° adapter for hard-to-reach grease fittings.
- Quickly connect to your Locknlube grease coupler or other couplers when needed.
- Three hardened steel jaws, rubber seal and check valve make a tight, reliable connection
_____________________________________________________________
LOCKNLUBE PUSH-ON 90° GREASE COUPLER
- A low-profile 90? adapter for hard-to-reach grease fittings with very little clearance over the zerk.
- Fits standard and metric grease fittings.
- Easily connects to all jaw-type couplers.
_____________________________________________________________
LOCKNLUBE GREASE BUSTER
- Cleans and flushes out old dried grease from fittings, pins, shafts, bushings and joints.
- Uses penetrating fluid and hydraulic pressure.
- Reduces downtime. Much cheaper than new bearings.
- Simply fill with solvent and tap the piston with a hammer.
_____________________________________________________________
LOCKNLUBE PRESSURE RETURN VALVE
- The Locknlube pressure return valve allows grease to flow from the hose back to the barrel with just the twist of a knob.
- Eliminates waste and extends coupler life.
- Installs in minutes; a must have for your cordless grease gun.
- No more pressue locks and messy, unsafe disconnections.
_____________________________________________________________
|
|
|
|
